Tercel Sedan 4-Door L4-1456cc 1.5L SOHC (3E) (1994)
/Page-717002.png)
3. INSPECT OUTPUT SHAFT
a. Using a micrometer, measure the outer diameter of the output shaft journal surface.
Minimum outer diameter:
Part A 32.970 mm (1.2980 in.)
Part B 37.970 mm (1.4949 in.)
Part C 31.970 mm (1.2587 in.)
If the outer diameter exceeds the minimum, replace the output shaft.
b. Using a dial indicator, check the shaft runout.
Maximum runout: 0.05 mm (0.0020 in.)
If the runout exceeds the maximum, replace the output shaft.
