Tundra 2WD V6-3.4L (5VZ-FE) (2004)
3. INSPECT THERMISTOR RESISTANCE
a. Disconnect the connector.
b. Measure resistance between terminals.
Standard resistance: 1,500 ohms at 25 °C (77 °F).
If resistance is not as specified, replace the thermistor.
3. INSPECT THERMISTOR RESISTANCE
a. Disconnect the connector.
b. Measure resistance between terminals.
Standard resistance: 1,500 ohms at 25 °C (77 °F).
If resistance is not as specified, replace the thermistor.