Tundra 2WD V6-3.4L (5VZ-FE) (2004)
Ball Joint: Service and Repair
Upper
REMOVAL
1. REMOVE STEERING KNUCKLE WITH AXLE HUB
2. REMOVE UPPER BALL JOINT
a. Remove the wire and boot.
b. Using a snap ring expander, remove the snap ring.
Ball Joint: Service and Repair
Upper
REMOVAL
1. REMOVE STEERING KNUCKLE WITH AXLE HUB
2. REMOVE UPPER BALL JOINT
a. Remove the wire and boot.
b. Using a snap ring expander, remove the snap ring.