Tundra 2WD V6-3.4L (5VZ-FE) (2004)
Ball Joint: Service and Repair
Lower
REMOVAL
1. REMOVE FRONT WHEEL
2. LOOSEN 4 LOWER BALL JOINT SET BOLTS
HINT: Do not remove the bolts.
3. DISCONNECT TIE ROD END
a. Remove the cotter pin and nut from the tie rod end.
b. Using SST, disconnect the tie rod end from the lower ball joint.
SST 09610-20012
4. REMOVE LOWER BALL JOINT
a. Remove the cotter pin and nut from the lower ball joint.