Tundra 2WD V6-4.0L (1GR-FE) (2005)
/Page-1350004.png)
11. REMOVE ARMREST ASSEMBLY
a. Using a screwdriver, remove the armrest cap.
b. Remove the bolt, armrest spacer, armrest lock plate and armrest assembly.
c. Remove the spacer from the armrest assembly.
12. REMOVE SEATBACK COVER AND PAD
a. Remove the seatback cover belt from the seat frame assembly.
b. Open the fastener.
c. Remove the hog rings from the seat frame assembly.
d. Remove the hog rings from the seat frame assembly.
e. Remove the 2 headrest supports from the seat frame assembly.
f.
Remove the seatback cover and pad from the seat frame assembly.
INSTALLATION
