Tundra 4WD V8-5.7L (3UR-FE) (2007)
Air Bag Control Module: Service and Repair
Front Airbag Sensor
Front Airbag Sensor
FRONT AIRBAG SENSOR
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt
pretensioner activation.
NOTE:
-
After the ignition switch is turned OFF, the navigation system requires approximately 90 seconds to record various types of memory and
settings. As a result, after turning the ignition switch OFF, wait 90 seconds or more before disconnecting the cable from the negative (-)
battery terminal.
-
Some systems need to be initialized after the cable is reconnected.