Tundra Access Cab LTD 4WD V8-4.7L (2UZ-FE) (2001)
a. Using a screwdriver, remove the left side lens.
b. Remove the 2 screws.
c. Using a screwdriver, rotate the clip by 90 degrees and remove it.
d. Remove the front personal light, then disconnect the connector.
HINT: At the time of installation, please refer to the following item. When installing the front personal light, attach the clip to the housing and
push it to the bracket.
12. REMOVE ROOM LIGHT
a. Using a screwdriver, remove the room light cover.
b. Remove the 2 screws and room light, then disconnect the connector.
13. Standard cab:
REMOVE COAT HOOK
a. Using a screwdriver, open the cap.
b. Remove the screw and coat hook.
14. Standard cab:
REMOVE BACK PANEL UPPER GARNISH