Tundra Access Cab LTD 4WD V8-4.7L (2UZ-FE) (2001)
a. Remove the bolt and front seat outer belt floor anchor.
Torque: 42 N.m (430 kgf.cm, 31 ft.lbf)
b. Using a screwdriver, remove the cap.
c. Remove the bolt and front seat outer belt shoulder anchor.
Torque: 42 N.m (430 kgf.cm, 31 ft.lbf)
d. Employ the same manner described above to the other side.
8. Access cab:
REMOVE ROOF SIDE RAIL GARNISH
a. Using a screwdriver, remove the caps.
b. Using a torx driver, remove the 2 torx screws and assist grip.
c. Using a screwdriver, remove the roof side rail garnish.
9. REMOVE SUN VISORS
a. Remove the 4 screws and 2 sun visors.
b. w/ Light:
Disconnect the connector.
10. REMOVE SUB-VISORS
Remove the 4 screws and 2 sub-visors.
11. REMOVE FRONT PERSONAL LIGHT