Tundra Access Cab LTD 4WD V8-4.7L (2UZ-FE) (2001)
/Page-1133001.png)
Load Compensator: Service and Repair
Disassembly and Assembly
DISASSEMBLY
1. REMOVE VALVE BRACKET
(a) Remove the nut, washer, bolt and 2 plate washers.
(b) Remove the 2 nuts, 2 washers, set plate and valve bracket from the valve body.
2. DISCONNECT SPRING FROM VALVE
Using pliers, remove the clip, and remove the spring from the valve.
