Tundra Access Cab LTD 4WD V8-4.7L (2UZ-FE) (2001)
Load Compensator: Service and Repair
Removal and Installation
REMOVAL
1. DISCONNECT SHACKLE NO. 2 FROM BRACKET
(a) Remove the nut and cushion retainer, and disconnect the shackle No. 2.
(b) Remove the 2 bushings and collar.
(c) Remove the 2 bolts and shackle bracket.
2. REMOVE LSP & BV ASSEMBLY
(a) Using SST, disconnect the 3 brake lines from the valve body.
SST 09751-36011
(b) Remove the 2 valve bracket mounting bolts and the LSP & BV assembly.
INSTALLATION