Venza AWD L4-2.7L (1AR-FE) (2009)
Wiring Harness: Service and Repair
Removal
U760F AUTOMATIC TRANSMISSION / TRANSAXLE: TRANSMISSION WIRE: REMOVAL
REMOVAL
1. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY
HINT: See the steps from "Remove Engine Assembly with Transaxle" through "Remove Automatic Transaxle Assembly" See: Service and
Repair/Removal and Replacement/Removal.
2. REMOVE TORQUE CONVERTER CLUTCH ASSEMBLY
3. REMOVE TRANSFER ASSEMBLY See: Transfer Case/Service and Repair/Removal and Replacement/Removal
4. REMOVE AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY See: Valve Body/Service and Repair/Removal and Replacement/Removal
5. REMOVE VALVE BODY OIL STRAINER ASSEMBLY See: Valve Body/Service and Repair/Removal and Replacement/Removal
6. REMOVE TRANSMISSION VALVE BODY ASSEMBLY See: Valve Body/Service and Repair/Removal and Replacement/Removal
7. REMOVE TRANSMISSION WIRE
(a) Remove the bolt and disconnect the 8 connectors.
(b) Remove the transmission wire from the clamp.
(c) Remove the bolt, lock plate and transmission wire from the transmission valve body assembly.