Venza AWD V6-3.5L (2GR-FE) (2010)
/Page-2253021.png)
(b) Connect the connector.
19. INSTALL FRONT DOOR INSIDE LOCKING CABLE ASSEMBLY
(a) Install the front door inside locking cable assembly.
(b) Engage the 3 claws.
20. INSTALL FRONT DOOR LOCK REMOTE CONTROL CABLE ASSEMBLY
(a) Install the front door lock remote control cable assembly.
21. INSTALL FRONT DOOR LOCK ASSEMBLY
NOTICE:
*
When reusing the removed front door lock assembly, replace the door lock wiring harness seal on the connector with a new one.
*
Do not allow grease or dust to adhere to the door lock wiring harness seal surface of the connector.
*
Reusing the door lock wiring harness seal or using a damaged door lock wiring harness seal may cause water intrusion. This may
result in a malfunction of the front door lock assembly.
(a) Apply MP grease to the sliding parts of the front door lock assembly.
(b) Install a new door lock wiring harness seal to the front door lock assembly.
