Venza AWD V6-3.5L (2GR-FE) (2010)
55. REMOVE VISOR ASSEMBLY RH
HINT
Use the same procedure for the RH side and the LH side.
56. REMOVE INNER REAR VIEW MIRROR STAY HOLDER COVER (w/ EC Mirror) See: Mirrors/Service and Repair/Inner Rear View
Mirror/Removal
57. REMOVE SPOT LIGHT ASSEMBLY See: Lighting and Horns/Dome Lamp/Service and Repair/Removal
58. REMOVE TELEVISION BASE (w/ Rear Seat Entertainment System) See: Accessories and Optional Equipment/Entertainment
Systems/Television / Monitor/Service and Repair/Removal
59. REMOVE TELEVISION DISPLAY ASSEMBLY (w/ Rear Seat Entertainment System) See: Accessories and Optional
Equipment/Entertainment Systems/Television / Monitor/Service and Repair/Removal
60. REMOVE ASSIST GRIP SUB-ASSEMBLY (w/o Sliding Roof)
(a) Using a clip remover, disengage the 4 claws.
Text in Illustration
NOTICE:
Do not forcibly pry the assist grip covers to prevent them from being deformed.
HINT
*
Gently pry on the assist grip covers as shown in the illustration to remove them.
*
Tape the clip remover tip before use.
(b) Pull off the 2 assist grip covers by hand.