Venza AWD V6-3.5L (2GR-FE) (2010)
50. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY RH
HINT
Use the same procedure for the RH side and the LH side.
51. REMOVE MAP LIGHT ASSEMBLY See: Console/Console Lamp/Service and Repair/Personal Light/Removal
52. REMOVE VISOR BRACKET COVER (for LH Side)
(a) Using a moulding remover, disengage the 4 claws and remove the visor bracket cover.
NOTICE:
Visor bracket cover cannot be reused.
53. REMOVE VISOR ASSEMBLY LH
(a) Remove the 2 screws and remove the visor assembly LH.
54. REMOVE VISOR BRACKET COVER (for RH Side)
HINT
Use the same procedure for the RH side and the LH side.