Venza AWD V6-3.5L (2GR-FE) (2010)
Brake Hose/Line: Service and Repair
Front Brake Flexible Hose
Components
BRAKE (FRONT): FRONT BRAKE FLEXIBLE HOSE: COMPONENTS
Removal
BRAKE (FRONT): FRONT BRAKE FLEXIBLE HOSE: REMOVAL
NOTICE:
If both the left and right side hoses are removed at the same time, be sure to place identification marks indicating the position on each
side.
HINT
*
Use the same procedure for the LH side and RH side.
*
The following procedure listed is for the LH side.
1. REMOVE FRONT WHEEL
2. DRAIN BRAKE FLUID
NOTICE:
If brake fluid leaks onto any painted surface, immediately wash it off.
3. REMOVE FRONT FLEXIBLE HOSE
(a) Remove the union bolt and gasket, and separate the front flexible hose.