Venza AWD V6-3.5L (2GR-FE) (2010)
Air Bag: Testing and Inspection
Steering Pad
SUPPLEMENTAL RESTRAINT SYSTEMS: STEERING PAD: ON-VEHICLE INSPECTION
CAUTION:
Be sure to follow the correct removal and installation procedures of the steering pad.
1. INSPECT STEERING PAD (VEHICLE NOT INVOLVED IN COLLISION)
(a) Perform a diagnostic system check See: Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes/DTC Check / Clear.
(b) Visually check for defects with the steering pad installed on the vehicle.
(1) The defects are as follows:
*
Cuts on the surface and in the grooves of the steering pad
*
Small cracks on the surface and in the grooves of the steering pad
*
Significant discoloration on the surface and in the grooves of the steering pad
OK:
No defects are found.
HINT
If any of the defects is found, replace the steering pad with a new one.
2. INSPECT STEERING PAD (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED)
(a) Perform a diagnostic system check See: Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes/DTC Check / Clear.
(b) Visually check for defects with the steering pad removed from the vehicle.