Venza AWD V6-3.5L (2GR-FE) (2010)
FRONT SUSPENSION: FRONT STABILIZER BAR (for 2GR-FE): INSTALLATION
1. INSTALL FRONT NO. 1 STABILIZER BAR BUSHING
(a) Install the 2 front No. 1 stabilizer bar bushings to the front stabilizer bar as shown in the illustration.
Text in Illustration
NOTICE:
When installing the front No. 1 stabilizer bar bushings, make sure that the cutout faces the rear of the vehicle.
2. INSTALL FRONT NO. 2 STABILIZER BRACKET LH
(a) Install the front No. 2 stabilizer bracket LH to the front No. 1 stabilizer bar bushing.
3. INSTALL FRONT NO. 2 STABILIZER BRACKET RH
HINT
Perform the same procedure as the LH side.
4. INSTALL FRONT STABILIZER BAR
(a) Install the front stabilizer bar to the front frame assembly.
5. INSTALL FRONT NO. 1 STABILIZER BRACKET LH
(a) Install the front No. 1 stabilizer bracket LH to the front frame assembly with the 2 bolts.