Venza AWD V6-3.5L (2GR-FE) (2010)
(b) Install the bolt and 4 clips.
(c) Install the pin hold clip.
Text in Illustration
NOTICE:
Insert the pin hold with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is
aligned vertically.
4. INSTALL FRONT FENDER OUTSIDE MOULDING RH
HINT
Use the same procedure for the RH side and LH side See: Body and Frame/Doors, Hood and Trunk/Hood/Hood Latch Release
Cable/Service and Repair/Installation.
5. INSTALL FRONT WHEEL RH