Venza AWD V6-3.5L (2GR-FE) (2010)
(a) Disconnect the connector.
(b) Remove the windshield washer motor and pump assembly.
HINT
Use a container to collect the washer fluid.
Installation
WIPER / WASHER: WASHER MOTOR (for Front Side): INSTALLATION
1. INSTALL WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY
(a) Install the windshield washer motor and pump assembly.
(b) Connect the connector.
(c) Connect the washer hose.
2. FILL WASHER JAR WITH WASHER FLUID
(a) Fill the washer jar with washer fluid.
3. INSTALL FRONT FENDER LINER RH
(a) Install the front fender liner RH with 3 new grommets and the 8 screws.