Venza FWD L4-2.7L (1AR-FE) (2009)
(d) Disconnect the hood lock control cable and remove the hood lock assembly.
10. REMOVE FRONT DOOR SCUFF PLATE LH See: Interior Moulding / Trim/Headliner/Service and Repair/Removal
11. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH See: Interior Moulding / Trim/Headliner/Service and Repair/Removal
12. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL See: Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal
13. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY
(a) Using a screwdriver, disconnect the clamps shown in the illustration.
Text in Illustration
HINT: Tape the screwdriver tip before use.
(b) Pull the hood lock control cable assembly from the engine compartment and remove it.