toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Components|Page 7932 > < Components|Page 7930
Page 7
background image

39. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY LH

(a) w/ Rear Speaker:

(1) Disconnect the connector.

(b) Put protective tape around the 3 stud bolts.

Text in Illustration

(c) Remove the bolt and disengage the 10 clips.
(d) Lift the lower edge of the roof side inner garnish assembly LH up and pull it out over the 3 stud bolts while ensuring ample clearance.

NOTICE:  Do not damage the roof headlining assembly or roof side inner garnish assembly.

(e) Pass the floor anchor of the rear seat outer belt assembly LH through the roof side inner garnish assembly LH and remove the roof side inner

garnish assembly LH.

Components|Page 7932 > < Components|Page 7930