Venza FWD L4-2.7L (1AR-FE) (2009)
(a) Using a screwdriver, disengage the 3 claws and remove the reclining remote control bezel LH.
Text in Illustration
HINT: Tape the screwdriver tip before use.
36. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY (for LH Side)
(a) Remove the 2 bolts.
(b) Disengage the 2 guides and remove the 2 luggage hold belt striker assemblies.
37. DISCONNECT REAR SEAT OUTER BELT ASSEMBLY LH See: Restraint Systems/Seat Belt Systems/Seat Belt/Service and Repair/Rear Seat
Outer Belt Assembly/Removal
38. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH
(a) Remove the bolt and clip.
(b) Disengage the 7 claws and 5 clips.
(c) Disconnect the connector and remove the deck trim side panel assembly LH.