Venza FWD L4-2.7L (1AR-FE) (2009)
NOTICE: Do not forcibly pry the assist grip covers to prevent them from being deformed.
HINT: Tape the screwdriver tip before use.
(b) Disengage the 4 clips and remove the assist grip sub-assembly.
(c) Remove the 4 clips from the vehicle body.
HINT: Use the same procedure for the RH side and the LH side.
63. REMOVE REAR ASSIST GRIP ASSEMBLY (w/ Sliding Roof)
(a) Using a screwdriver, disengage the 6 claws and remove the 2 assist grip covers.
Text in Illustration
NOTICE: Do not forcibly pry the assist grip covers to prevent them from being deformed.
HINT: Tape the screwdriver tip before use.
(b) Disengage the 4 clips and remove the rear assist grip assembly.
(c) Remove the 4 clips from the vehicle body.
HINT: Use the same procedure for the RH side and the LH side.
64. REMOVE VISOR HOLDER