Venza FWD L4-2.7L (1AR-FE) (2009)
Audible Warning Device: Service and Repair
Installation
BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: SKID CONTROL BUZZER: INSTALLATION
INSTALLATION
1. INSTALL SKID CONTROL BUZZER ASSEMBLY
(a) Connect the skid control buzzer assembly connector.
(b) Install the skid control buzzer assembly clamp.
(c) Install the wire harness clamp.
2. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY
HINT: Refer to the procedure up to Install Driver Side Knee Airbag Assembly See: Restraint Systems/Air Bag Systems/Air Bag/Service and
Repair/Knee Airbag Assembly/Installation.
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Repair Instruction - Initialization.
4. INSPECT SRS WARNING LIGHT See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Knee Airbag Assembly/Installation