Venza FWD L4-2.7L (1AR-FE) (2009)
Glove Box Lamp: Service and Repair
Installation
LIGHTING (INT): GLOVE BOX LIGHT: INSTALLATION
INSTALLATION
1. INSTALL GLOVE BOX LIGHT ASSEMBLY
(a) Connect the connector.
(b) Engage the 2 claws to install the glove box light assembly.
2. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Installation
3. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Installation
4. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH
HINT: Use the same procedure for the RH side and LH side See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation.
5. INSTALL FRONT DOOR SCUFF PLATE RH
HINT: Use the same procedure for the RH side and LH side See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation.