Venza FWD L4-2.7L (1AR-FE) (2009)
Glove Box Lamp: Service and Repair
Removal
LIGHTING (INT): GLOVE BOX LIGHT: REMOVAL
REMOVAL
1. REMOVE FRONT DOOR SCUFF PLATE RH
HINT: Use the same procedure for the RH side and LH side See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal.
2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH
HINT: Use the same procedure for the RH side and LH side See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal.
3. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal
4. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal
5. REMOVE GLOVE BOX LIGHT ASSEMBLY
(a) Disengage the 2 claws.
(b) Disconnect the connector and remove the glove box light assembly.