Venza FWD V6-3.5L (2GR-FE) (2010)
Drive Belt: Service and Repair
Removal
2GR-FE ENGINE MECHANICAL: DRIVE BELT: REMOVAL
1. REMOVE FRONT WHEEL RH
2. REMOVE NO. 1 ENGINE UNDER COVER
3. SEPARATE FRONT FENDER LINER RH
4. REMOVE FRONT FENDER APRON RH
5. REMOVE V-RIBBED BELT
(a) Release the V-ribbed belt tension by turning the V-ribbed belt tensioner counterclockwise, and remove the V-ribbed belt from the V-ribbed
belt tensioner.
(b) While turning the V-ribbed belt tensioner counterclockwise, align with its holes, and then insert a 5 mm hexagon wrench into the holes to fix
the V-ribbed belt tensioner.