Venza FWD V6-3.5L (2GR-FE) (2010)
Text in Illustration
Text in Illustration
(d) Reconnect the ECM connector.
NG -- CHECK HARNESS AND CONNECTOR (ACCESSORY METER ASSEMBLY - ECM)
OK -- REPLACE ECM See: Powertrain Management/Computers and Control Systems/Engine Control Module/Service and
Repair/Removal
7. CHECK HARNESS AND CONNECTOR (ACCESSORY METER ASSEMBLY - ECM)
(a) Disconnect the accessory meter assembly connector.
(b) Disconnect the ECM connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance (Check for Open):
(d) Reconnect the ECM connector.
(e) Reconnect the accessory meter assembly connector.
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR (ACCESSORY METER ASSEMBLY - ECM)
OK -- REPLACE ACCESSORY METER ASSEMBLY See: Instrument Panel, Gauges and Warning Indicators/Instrument Cluster /
Carrier/Service and Repair/Removal and Replacement/Accessory Meter/Removal