Venza FWD V6-3.5L (2GR-FE) (2010)
MOTOR SALES, U.S.A., INC.
2. DISPOSE OF STEERING PAD (WHEN INSTALLED IN VEHICLE)
NOTICE:
*
When disposing of the steering pad, never use the customer's vehicle to deploy the airbag.
*
Be sure to observe the following procedure when deploying the airbag.
HINT
Prepare a battery as the power source to deploy the airbag.
(a) Check the function of SST.
SST : 09082-00700
CAUTION:
When deploying the airbag, always use the specified SST:
SRS Airbag Deployment Tool
(1) Connect SST to the battery.
Connect the red clip of SST to the positive (+) battery terminal and the black clip of SST to the negative (-) battery terminal.
Text in Illustration
(2) Check the function of SST.
Press the SST activation switch and check that the LED of the SST activation switch comes on.
CAUTION:
*
Do not connect the yellow SST connector to the airbag.
*
If the LED comes on when the activation switch is not being pressed, SST is malfunctioning. Replace SST.
(3) Disconnect SST from the battery.