Hydraulic Hose, Replace - Model 53-B
Remove, Disconnect Close folding hood. Front quarter panel, right and left - see operation "Front quarter panel, remove and install - Model 53-B". Upper rear end panel shelf - see operation "Upper rear end panel shelf, remove and install - Model 53-B". Rear quarter panel, right - see operation "Rear quarter panel, remove and install - Model 53-B". Turn fastening screws in hydraulic pump. Hydraulic pump (rear accessible), release and disconnect wiring harness plug (1). Loosen and seal hydraulic hoses (2). |
|
Remove, Disconnect Open retaining clips, loosen and seal hydraulic hoses (arrows) from hydraulic cylinder.
Install, Connect Install colour-marked hydraulic hoses with no tension - see operation. "Overview of Hydraulic system - Model 53-B", close retaining clips.
Inspect Check connections for leaks
Install, Connect Hydraulic pump, fastening screws, rear quarter panel. Shelf-rear quarter panel top section, front quarter panel. Hydraulic system bleed - see operation "Hydraulic system, bleed - Model 53-B". |
|
|