Install, Connect
Fit the exhaust manifold (2) with turbocharger (3) and fit a new cylinder head gasket - tightening torque 24 Nm. Fit turbocharger support to cylinder block - tightening torque 51 Nm. Fit the exhaust pipe with a new seal to the turbocharger support - tightening torque 67 Nm.
Install lower coolant hose on radiator. Install oil return pipe.
Fit the oil feed line with a new seal to the cylinder block and the coolant pipes to the turbocharger. Fit the heat protection plate to the exhaust manifold and turbocharger. Install the upper coolant pipe, charge air pipe holder to the turbocharrger and charge air cooler. Fit the air intake hose to the turbocharger and intake manifold. Install the fan motor - see operation "Fan motor Remove and Install".
Top up cooling system - see operations "Cooling System, Top Up and Bleed" and "Cooling System, Check For Leaks ". Check engine oil level, correct if necessary.