vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Timing, Check and Adjust > < Oil Consumption, Measure

 

Boost Pressure, Check  

Object Number: 616192  Size: DEFAULT  Install, Connect   

Disconnect pressure hose from intake manifold. Insert pressure gauge from Pressure and Vacuum Hand Pump MKM-667 between intake manifold and pressure hose connections with corresponding adapters (arrows).  

Object Number: 616196  Size: DEFAULT  Inspect   

Check that entire intake system is in good condition.  

Start the motor and allow to run at high speed without load. The boost pressure may climb to a maximum 72 kPa (0,72 bar) at 4400 min -1 .  

Object Number: 616191  Size: DEFAULT  Remove, Disconnect   

Remove Pressure Gauge MKM-667 with adapters and connect pressure hose to intake manifold.  

Object Number: 2393035  Size: DEFAULT

 

 

Timing, Check and Adjust > < Oil Consumption, Measure