Valve Seat, Cut
Place cylinder head on wooden blocks.
Install, Connect
Intake and exhaust - use Guide Drift KM-340-27.
Valve seat (II)
- 45 ° side with KM-340-29.
Upper correction angle (I)
- 30 ° -side with KM-340-29.
Lower correction angle (III)
- 60 ° -side with KM-340-26.
Inspect
Dimension for valve seat width:
- 1.0 to 1.4 mm (intake).
- 1.4 to 1.8 mm (exhaust).
Clean chippings from cylinder head.
Before installing valves - see operations "Valve, Grind" and "Valve, Grind in".