Valve Seat, Cut
Place cylinder head on wooden blocks.
Measure
Inlet and outlet - KM-340-27 guide spike 1) use.
Valve seat (II)
- 45 ° - Side with KM-340-13.
Upper correction angle (I)
- 30 ° - Side with KM-340-13.
Lower correction angle (III)
- 60 ° - Side with KM-340-26.
Dimension for valve seat width:
- 1.0 to 1.4 mm (intake).
- 1.4 to 1.8 mm (exhaust).
- Clean chippings from cylinder head.
- Before installing valves - see operations "Valve, Grind" and "Valve, Grind in".
1) With C 20 XE: use KM-340-7