Remove front right engine damping block - see operation "Engine Damping Blocks, Remove and Install". Remove engine damping block bracket (1) from auxiliary aggregates bracket. Mark direction of rotation of ribbed V-belt. Tighten ribbed V-belt tension roller with KM-913-A in direction of arrow (clockwise) and remove ribbed V-belt.
Install, Connect Install ribbed V-belt - tighten ribbed V-belt using ribbed V-belt tension roller and KM-913-A. Note direction or rotation and installation position of ribbed V-belt. Attach engine damping block bracket to auxiliary aggregates bracket - 60 Nm/44 lbf. ft. Install front right engine damping block - see operation "Engine Damping Blocks, Remove and Install". |