Vauxhall Workshop Service and Repair Manuals

Oil Cooler Thermostat, Remove and Install (X 17 DTL)  

  Remove, Disconnect   

Remove closure plug (1) from oil cooler adapter - collect escaping engine oil. Remove seal ring (2), spring (3) and expansion element (4).     Important!    Closure bolt is spring-loaded.     Install, Connect    Insert expansion element - note installation position. Insert spring into oil pump. Install closure bolt with new seal ring on oil cooler adapter - tightening torque - 40 Nm/29.5 lbf. ft.   Check engine oil level and correct if necessary.