Vauxhall Workshop Service and Repair Manuals

Hydraulic System, Top Up and Bleed  

To check fluid level, use the dipstick in the screw-on fluid reservoir cap.     Inspect    The stationary engine is filled up with fluid to MAX mark (1). Start engine and immediately top up fluid to lower MIN mark (2).     Important!    The power steering pump may not run dry. Used oil may not be used again.   Turn the steering wheel 2 to 3 times 45 ° slowly towards the left and right and 2 times turn it from stop to stop. Correct again the oil level in the oil reservoir. For oil quality - see "Technical Data - Hydraulic Steering Gear".   Switch off engine and check fluid level.   Fluid at operating temperature:   approx. 80 ° C/ 176 ° F up to MAX (1).   Fluid cold:   approx. 20 ° C/ 68 ° F up to MIN (2).     Check hydraulic system for leaks.