Anti-theft Warning System ATWS Quick Check
F5:ACTUATOR TEST
HORN
Conditions for Checking
Nominal Value
Affected terminals: 10
Possible trouble codes: 25
Ignition ON
Press key F5 in the system main
menu, select the desired test using the arrow keys and confirm with YES.
Follow the instructions in the TECH 1 display.
Start actuator test
TECH 1 display:
HORN
alternating
INACTIVE 12V
and
ACTIVE 0V
Acoustic signal device (horn)
active
Note:
The horn is actuated at a
frequency of 1 Hz (switch-on period 0.2 s).
The check is completed after a
maximum of 5 cycles.