Possible
faults:
(if nominal value is not attained)
Measured resistance higher than nominal value:
1. Interruption between ECWW
switch S 37.1 and ECWW switch wiring harness plug, driver's door X 49.
2. ECWW switch wiring harness
plug, driver's door X 49 disconnected.
3. Interruption in driver's door
wiring harness between wiring harness plug X 49 and ECWW motor M 47.
4. ECWW motor M 47 defective.
Measured resistance lower than
nominal value (less than 10 W):
1. Short circuit to ground
between ECWW switch S 37.1 and ECWW switch wiring harness plug, driver's door
X 49.
2. Short circuit to ground in
driver's door wiring harness between wiring harness plug X 49 and ECWW motor
M 47.
3. Short circuit to ground in
ECWW motor M 47.
|