If the display WARNING appears in TECH 1, the coolant fluid
level is too low at present or a fault has occurred in the circuit. The
malfunction is recognized directly at ignition ON; when the vehicle is in
operation, a certain amount of time (approx. 30 s) elapses until the fault is
stored.
When WARNING appears in TECH 1 it can be quitted via the
start key "R" of the MID switch on the screen wiper lever. The TECH
1 display then shows WARNING QUIT. The fault is still present.
If the display HISTORY WARNING appears in TECH 1, the
coolant level was too low at an earlier time or there was a
fault in the circuit. At present, the coolant level circuit is okay
(loose contact). The HISTORY WARNING can be deleted in TECH 1 mode F4:CLEAR
CODES when the fault has been eliminated.
|