vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

F0: DATA LIST - Test Step 16 - BRAKE LIGHT SW. > < F0: DATA LIST - Test Step 14 - BRAKE PADS ST.

F0:DATA LIST

 

 

No.

TECH 1 Display

Conditions for Checking

Nominal Values

Trouble Codes

Terminal

 

15

BRAKE LIGHT FUSE

 

Ignition ON

OKAY          12V

122

X 20 5/13

 

Notes for Trouble-shooting:

Nominal Value:

Cause of Fault:

(If nominal value is not attained)

 

·   Ignition OFF

·   Replace fuse F 28:

 

OK

·   Replace fuse F 28:

·   Ignition ON

·   Do not actuate brake pedal

·   Replace fuse F 28:

OK

·   Lead from F 28 to MID wiring harness plug X 20/Ter. 5, brake lamp switch S 8 and hazard warning lamps switch S 52 has short circuit to ground

·   Lead from S 52 to turn signal unit K 10 has short circuit to ground

·   Turn signal unit K 10 defective

·   Hazard warning lamps switch S 52 defective

·   MID defective

 

·   Actuate brake pedal

·   Replace fuse F 28:

OK

·   Lead from brake lamp switch S 8 to bulb monitor P 25/Ter. 12 and wiring harness plug X 20/Ter. 4 has short circuit to ground

·   Switch S 8 defective

·   MID defective

 

·   Measure voltage between F 28 and ground:

> 11 volts

·   Lead between ignition lock S 1 and F 28 is interrupted

 

·   Ignition OFF

·   Disconnect plug X 20 from MID

·   Ignition ON

·   Measure voltage between X 20/Ter. 5 and ground:

 

 

·   If nominal values are attained

> 11 volts

·   Lead between F 28 and X 20/Ter. 5 is interrupted

·   MID defective

 

 

 

 

·   MID defective

 

 

 

 


Related Literature Units
-Table 2, Trouble Code Table - Code 122 - BRAKE LIGHT FUSE VOLTAGE LOW

F0: DATA LIST - Test Step 16 - BRAKE LIGHT SW. > < F0: DATA LIST - Test Step 14 - BRAKE PADS ST.