Signal Switch, Remove and Install Vehicles without driver's airbag
 Remove, Disconnect Pull signal switch from steering wheel, remove cable.
 Install, Connect Cable, signal switch. | 
|
Vehicles with driver's airbag:
Remove, Disconnect Airbag unit - see operation "Airbag Unit, Driver's Side, Remove and Install" in group "C". Remove left (1) and right (4) signal switch actuation from brackets. Remove wiring harness plug (3) from bracket. Release wiring harness plug clips and disconnect wiring harness plug. (2) shows airbag unit wiring harness plug.
Install, Connect Wiring harness plug, left and right signal switch actuators, airbag unit. | 
|
|
