Lock Cylinder for Steering and Ignition Lock, Replace The following operations are analogous for vehicles with immobiliser and transponder. Special features for immobiliser with transponder - see operation "Immobiliser Control Unit, Remove and Install" in group "J". During MY '95, the B (2) on the ignition lock panel will be changed to the dot (1). | 
|
 Remove, Disconnect Signal switch panelling - 5 bolts. | 
|
Illus. E 1603 shows the removed lock cylinder, with the sickle A still present. It is important that the spring be correctly inserted when replacing the lock cylinder (pressed end up), to ensure that the steering wheel lock engages. | 
|
|
