Field Remedy: 1633

Remedy:

In case of customer complaint attach the centre mounting with glue.

1. Lift spoiler approx. 20 mm (use e.g. padded piece of wood) for the work
on the centre column. The position of the 2 distance pads is approx. 150 mm
removed from centre mounting.  

2. Remove the adhesive pad from centre mounting.

3. Clean the tailgate surface and the centre mounting area with cleaner
(cleaner is component of the set, glue).
On the adhesive area especially in low area of centre mounting the adhesive
residuals must be completely removed.

4. Mask exactly the tailgate in low area of the centre mounting around with
masking tape to avaid that primer or adhesive material will contaminate the
tailgate.

5. Primer the adhesive area on tailgate and the low area of centre mounting
with primer according working instruction of the manufaturer.

6. Apply sufficient glue on primered area. Observe the working instruction
of the manufaturer.

7. Remove excessive glue, the masking tape and the 2 distance pads. Push the
centre mounting towards the tailgate within max. 3 minutes. Load the spoiler
with a padded and fall protected weight (aprox. 5 kg). 

8. Clean the surface with cleaner, if an outlet of adhesive material accours. 

9. Do not move the vehicle for at least 12 hours at an ambient temperature of
min. 18 °C.     

10. Remove the weight.

Spare-Parts:                            Part-No.:      Catalogue-No.:

Set, glue                               90541160       15 04 811