vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Damping Bushings > < Sealants, Lubricants and Locking Compounds

Recommended Torque Values

Note:   Fastening bolts which are attached with torque and a tightening angle (beyond the elastic limit), may not be re-used in service after being released.

 

Nm

Brake hose to brake line

16

Brake line holder on rear axle

8

Handbrake cable bracket to rear axle

8

Rear axle bracket to damping bushing

90 + 60° + 15° 1) 2)

Rear axle holder to vehicle underbody

90 + 30° + 15° 1)   3)

Bearing actuation spring proportioning valve to bracket

20

Air guide plate to vehicle underbody

2,2

Wheel to wheel hub

110


Recommended Torque Values (continued)

Note:   Fastening bolts which are attached with torque and a tightening angle (beyond the elastic limit), may not be re-used in service after being released.

 

Nm

Wheel bearing unit on rear axle

50 + 30° + 15° 2)  

Shock absorber to vehicle underbody

90

Shock absorbers on rear axle

110



1 ) Use new fastening bolts.
2 ) Use new fastening nuts.
3 ) Assembly and dismantling with a pulse or impact driver is not permissible.

Related Literature Units
-
-

Damping Bushings > < Sealants, Lubricants and Locking Compounds