Luggage compartment lid, remove and install (model
L69)
Remove
1. |
Open luggage compartment lid
|
|
2. |
Prepare wiring harness
• |
Disconnect wiring harness plug (1)
|
• |
Pull wiring harness with rubber grommet out of body
|
|
|
3. |
Detach gas-filled damper
• |
Unclip 2x gas-filled dampers and lay aside
Note: Support the
luggage compartment lid!
|
|
|
4. |
Detach luggage compartment lid
Note: This requires a
second person
• |
Remove the luggage compartment lid
|
|
|
Install
5. |
When replacing the luggage compartment lid, transfer the
attaching parts
|
6. |
Install the luggage compartment lid
Note: This requires a
second person
• |
Position the luggage compartment lid
|
|
7. |
Fasten the gas-filled dampers
• |
Clip in 2x gas-filled dampers
|
|
8. |
Install the luggage compartment lid wiring harness
• |
Insert and route wiring harness with rubber grommet in body
|
• |
Connect wiring harness plug
|
|
9. |
Fit luggage compartment lid
Position
|
Dimension
|
Tolerance
|
|
in mm
|
in mm
|
I
|
8.6
|
+/- 1.0
|
II
|
6.0
|
+/- 1.0
|
III
|
3.8
|
+/- 0.8
|
IV
|
3.8
|
+/- 0.8
|
|
|
|
|