Replace center folding roof seal - L67
Remove
|
1. |
Place folding top in service position
• |
Use special tool BO-47651-200 (1)
|
• |
Secure roof with accompanying tensioner belt (2)
|
|
|
|
3. |
Remove moulded headlining (1)
• |
Remove moulded headlining
|
|
|
4. |
Detach seal
• |
Remove seal 2x from guide
– |
Remove Butyl cord carefully from bodyshell
Note: When reusing the
seal, carefully remove the butyl cord from the seal.
|
|
|
|
|
5. |
Remove adhesive residue from folding roof centre
|
Install
6. |
Affix Nitto foam tape (1) to the folding roof centre
• |
Affix Nitto foam tape in an area so wide that it aligns with
the radius (2)
|
|
|
|
7. |
Attach Butyl cord (1) to both front faces
• |
Attach Butyl cord as illustrated
|
|
|
|
8. |
Attach Butyl cord (1) to both retraining strips (2)
• |
Mould the Butyl cord around ball as illustrated and affix
|
|
|
|
9. |
Affix Butyl cord (1) to both threaded bolts of the centre
folding roof weatherstrip
|
|
|
10. |
Insert centre folding roof weatherstrip
|
11. |
Attach Butyl cord (1) to both inner sides
• |
Attach Butyl cord as illustrated
|
|
|
|
12. |
Attach centre folding roof weatherstrip
• |
Apply sealing compound under weatherstrip
Note: As illustrated,
apply the sealant bead approx. 45 mm
from the edge.
|
|
|
|
13. |
Attach centre folding roof weatherstrip assembly
• |
Check the centre folding roof weatherstrip for proper
seating
|
|
14. |
Remove remaining glue
|
15. |
Attach center moulded headlining
|
16. |
Close folding top
• |
Remove special tool BO-47651-200
|
|
|