|
Replace rear window console - L67
 Remove
| 1. |
Detach rear window panelling 
|
| 2. |
Detach water drain hose
| • |
Pull off 2x water drain hoses (1) in the area of load
compartment / rear window
|
|
|
|
| 3. |
Loosen rear window (1)
Note: Mark installation
position.
| • |
Disconnect 2x wiring harness plug (3) for heated rear
screen,
|
| • |
Unscrew 2x bolts at bottom (4)
|
| • |
Loosen 2x top screws (2)
|
|
| 4. |
Remove rear window
Note: 2nd mechanic
required.
| • |
Remove rear window upwards
|
|
|
|
|
| 5. |
Detach rear window console (1)
| • |
Unscrew 3x bolt (arrows)
|
| • |
Unscrew 3x bolt (arrows)
|
|
|
Install
| 6. |
Attach rear window console
| • |
Tighten 3x bolts 13 Nm
Note: Screws are
microencapsulated and must be replaced! Threads re-cut!
|
|
| 7. |
Insert rear window
Note: 2nd mechanic
required.
| • |
Insert rear window from above
|
| • |
Screw in 2x bolts, top
Note: Screws are
microencapsulated and must be replaced! Threads re-cut!
|
|
| 8. |
Install rear window
Note: Pay attention to
marks
| • |
Tighten 4x bolts 9 Nm
Note: Screws are
microencapsulated and must be replaced! Threads re-cut!
|
| • |
Disconnect 2x wiring harness plug for heated rear screen
|
| • |
Attach 2x water drain hose
|
|
| 9. |
Attach rear window panelling
|
|
