Replace carpet - complete (with adjustable rear
seats) - L35
Remove
2. |
Wait 1 minute for airbag to deactivate
|
3. |
Detach belt securing panel - driver's side
• |
Unclip panel upwards (1)
|
|
4. |
Detach belt securing panel - passenger side
• |
Unclip panel upwards (1)
|
|
5. |
Attach seat belt at front seat - driver's side
|
6. |
Attach seat belt at front seat - passenger's side
|
|
|
7. |
Detach driver's side front seat
|
8. |
Detach passenger side front seat
|
9. |
Remove driver's side front seat
• |
Remove from front guide
|
• |
Release and disconnect compact connector
|
|
10. |
Remove passenger's side front seat
• |
Remove from front guide
|
• |
Release and disconnect compact connector
|
|
|
|
11. |
Detach footwell instrument panel padding left and right
• |
Unscrew 2x screws on driver's side and remove footwell
panelling from bracket
|
• |
Unscrew 2x screws on passenger's side and remove footwell
panelling from bracket
|
|
|
|
12. |
Detach central console
|
13. |
Fold down rear seat backrest, right
|
14. |
Fold down rear seat backrest, left
|
15. |
Remove sill strip completely - both sides
• |
Remove inner panelling sill upwards
|
|
|
|
16. |
Detach lower C-pillar panel, both sides
• |
Unclip 4x clips
– |
Pull out panelling in lower area of the B-pillar cover
|
|
|
|
|
17. |
Remove yaw sensor (2)
• |
Unscrew 2x nuts (arrows)
|
• |
Disconnect wiring harness plug (1)
|
|
18. |
Remove yaw sensor retaining plate
|
|
|
|
19. |
Remove carpet - completely
• |
Open quick release fastener
|
|
|
Install
20. |
Install carpet - completely
Note: 2nd mechanic
required!
• |
Close quick release fastener
|
|
21. |
Install yaw sensor retaining plate
|
22. |
Install yaw sensor
• |
Connect wiring harness plug
|
|
23. |
Install lower C-pillar inner panelling - left side
• |
Clip in 4x clips
– |
Place panelling in lower area of the B-pillar cover
|
|
|
24. |
Install lower C-pillar inner panelling - right side
• |
Clip in 4x clips
– |
Place panelling in lower area of the B-pillar cover
|
|
|
25. |
Fold down rear seat backrest, right
|
26. |
Fold down rear seat backrest, left
|
27. |
Install centre console
|
28. |
Attach footwell instrument panel padding left and right
• |
Tighten 2x bolts driver's side
|
• |
Tighten 2x bolts passenger's side
|
|
29. |
Install sill strip completely - both sides
|
30. |
Insert driver's side front seat
• |
Connect and latch compact connector
|
• |
Insert seat in front guide
|
|
31. |
Fasten driver's side front seat
• |
Tighten 2x bolt 35 Nm
Note: Use screw locking
compound
|
|
32. |
Attach seat belt driver's side
• |
Tighten bolt 20 Nm
Note: Use screw locking
compound
|
|
33. |
Insert driver's side front seat panel
• |
Place front seat in original position
|
|
34. |
Insert front seat - passenger side
• |
Connect and latch compact connector
|
• |
Insert seat in front guide
|
|
35. |
Fasten passenger side - front seat
• |
Tighten 2x bolt 35 Nm
Note: Use screw locking
compound
|
|
36. |
Attach seat belt on passenger's side
• |
Tighten bolt 20 Nm
Note: Use screw locking
compound
|
|
37. |
Insert passenger's side front seat panel
• |
Place front seat in original position
|
|
38. |
Install rear bench seat
• |
Insert rear seat cushion and position
|
|
40. |
Program volatile memories
|
|