vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Rear Seat > < Replace roll bat (not deployed) - L67

Central console, remove

  Remove

1.   Detach central console storage compartment, rear
•   Unclip 8x clips and remove storage compartment
Object Number: 3446763  Size: DEFAULT


2.   Loosen central console, rear
•   Place both seats in the most forward position
•   Unscrew nut (2)
•   Unscrew 2x bolt (1)
Object Number: 3446764  Size: DEFAULT


3.   Unclip hand brake moulding
4.   Loosen central console front and middle
•   Place both seats in the rear-most position
•   Unscrew 2x bolts (1), front
•   Detach Tech2 connection moulding
Unscrew middle bolt (2)
Object Number: 3446765  Size: DEFAULT


5.   Unclip ashtray
•   Disconnect 2x wiring harness plug
•   Remove ashtray
Object Number: 3446762  Size: DEFAULT


6.   Loosen central console, upper front
•   Unscrew 2x bolt (2)
7.   Detach gear shift / selector lever panel
•   Unscrew 2x bolt (1)
Object Number: 3446766  Size: DEFAULT


8.   Remove central console
Note:   Carefully take out central console to the rear

  Install

9.   Position central console
•   Slide central console in the front-most guide (1)
Object Number: 3446767  Size: DEFAULT


10.   Attach gear shift / selector lever panel
•   Tighten 2x bolts
11.   Fasten central console, upper front
•   Tighten 2x bolts
12.   Clip in ashtray
•   Connect 2x wiring harness plugs
13.   Fasten central console front and middle
•   Place both seats in rear-most position
•   Tighten 3x bolt
•   Clip in Tech2 connection moulding
14.   Clip in hand brake moulding
15.   Fasten central console, rear
•   Place both seats in the most forward position
•   Tighten nut
•   Tighten 2x bolts
16.   Clip in central console storage compartment, rear
•   Clip in 8x clips

Rear Seat > < Replace roll bat (not deployed) - L67